Directional Control Proportional Valves

*PRODUCT IMAGE IS REPRESENTATIVE PROVIDED BY THE MANUFACTURER. DO NOT MAKE BUYING DECISIONS SOLEY BASED ON THE IMAGE. PLEASE VERIFY SPECIFICATIONS MEET YOUR REQUIREMENTS.

Parker’s selection of 3-position, 4-way proportional directional control valves provide predictable and precise controls for applications that require bidirectional flow and controllability. These valves are capable of handling flows up to 32 lpm (8.5 gpm) and pressures as high as 350 bar (5000 psi). These valves can be used in conjunction with an external compensator finer control is required, however these valves are ideal for variable flow actuator or motor applications that need exact control with to ability to stop completely and an acceptable rate of leakage due to the inherent characteristic spool design. Parker’s 3-position, 4-way proportional directional control valves can pair with any Current Controlled Pulse Width Modulation (PWM) valve driver and can be used on a variety of mobile and industrial applications within the agriculture, construction, and manufacturing markets.

Markets:
• Agriculture
• Construction
• Miscellaneous Industrial
• Miscellaneous Manufacturing
• Miscellaneous Mobile

Features/Benefits:
• One piece cartridge housing
• Regulates flow proportionally to input solenoid current
• All external parts zinc plated

Applications:
• Applications requiring precise controls
• Variable flow applications
• Actuator control
• Motor speed control

Additional Technical Insight:
Recommended to be used with a Current Controlled Pulse Width Modulation (PWM) valve driver.

View as Grid List

Sort by

Display per page

SKU	Availability	Price	Maximum Operating Pressure	Body Material	Minimum Operating Temperature	Maximum Kinematic Viscosity	Division	Maximum Operating Temperature	Weight	Coil Nut Tightening Torque	Coil Type	Power Consumption	Installation Torque	Cavity Size	For Fluid Type	Frequency	Configuration	Actuation Type	Operation Type	Valve Material	Filter Efficiency Rating	Maximum Inlet Pressure Rating	Operating Temperature	Response Time	Maximum Tank Pressure	Function	Flow Rate	Leak Rate	Seal Material	Maximum Flow Rate	Override Functionality	Current	Hysteresis	Flow Rate Accuracy	Variation of Opening Point	Configuration	Seal Material	Maximum Inlet Pressure Rating	Flow Rate	Override Functionality
DSP105C1M	Backordered	Contact Us	210 bar	n/a	-35 °F	45-2000 SSU (6 to 420 cSt)	Hydraulic Systems Division	+200 °F	0.28 kg	3 lb-ft	5/8" Super Coil High Watt (CAP)	28 W	25 lb-ft	C10-4	Mineral-based or synthetic hydraulic fluids	100-400 Hz	Normally Closed	Electrical, Manual	Solenoid operated, Manually operated	All parts steel. All operating parts hardened steel	ISO 4406 18/16/13, SAE Class 4	210 bar	-37 to +93 °C	50 ms	210 bar	Proportional Directional Control	32 L/min	10 @ 3000 PSI (210 BAR) cm3/min	D-Ring (Standard	8.5 Gal/min	Push and Pull	2.33 @ 12 VDC, 1.17 @ 24 VDC A	Less than 6%	+/- 15% @ 75% Nominal Current and Constant DeltaP Maintained with Pressure Compensator	25% - 30% of Input Signal	Normally Closed	D-Ring (Standard)	3000 PSI, 210 BAR	8.5 GAL/MIN, 32 L/MIN	Push and Pull
DSP105C1MN	Backordered	Contact Us	3000 psi	n/a	-30 °F	45-2000 SSU (6 to 420 cSt)	Hydraulic Systems Division	+250 °F	0.28 kg	4.1 Nm	5/8" Super Coil High Watt (CAP)	28 W	34 Nm	C10-4	Mineral-based or synthetic hydraulic fluids	100-400 Hz	Normally Closed	Electrical, Manual	Solenoid operated, Manually operated	All parts steel. All operating parts hardened steel	ISO 4406 18/16/13, SAE Class 4	3000 psi	-34 to +121 °C	50 ms	210 bar	Proportional Directional Control	8.5 Gal/min	10 @ 3000 PSI (210 BAR) cm3/min	Nitrile	8.5 Gal/min	Push and Pull	2.33 @ 12 VDC, 1.17 @ 24 VDC A	Less than 6%	+/- 15% @ 75% Nominal Current and Constant DeltaP Maintained with Pressure Compensator	25% - 30% of Input Signal	Normally Closed	Nitrile	3000 PSI, 210 BAR	8.5 GAL/MIN, 32 L/MIN	Push and Pull
DSP105C4M	Backordered	Contact Us	210 bar	n/a	-35 °F	45-2000 SSU (6 to 420 cSt)	Hydraulic Systems Division	+200 °F	0.57 lb	4.1 Nm	5/8" Super Coil High Watt (CAP)	28 W	25 lb-ft	C10-4	Mineral-based or synthetic hydraulic fluids	100-400 Hz	Floating Center	Electrical, Manual	Solenoid operated, Manually operated	All parts steel. All operating parts hardened steel	ISO 4406 18/16/13, SAE Class 4	3000 psi	-37 to +93 °C	50 ms	210 bar	Proportional Directional Control	8.5 Gal/min	10 @ 3000 PSI (210 BAR) cm3/min	D-Ring (Standard	8.5 Gal/min	Push and Pull	2.33 @ 12 VDC, 1.17 @ 24 VDC A	Less than 6%	+/- 15% @ 75% Nominal Current and Constant DeltaP Maintained with Pressure Compensator	25% - 30% of Input Signal	Floating Center	D-Ring (Standard)	3000 PSI, 210 BAR	8.5 GAL/MIN, 32 L/MIN	Push and Pull
DSP105C4MN	Backordered	Contact Us	3000 psi	n/a	-34 °C	45-2000 SSU (6 to 420 cSt)	Hydraulic Systems Division	+250 °F	0.57 lb	3 lb-ft	5/8" Super Coil High Watt (CAP)	28 W	25 lb-ft	C10-4	Mineral-based or synthetic hydraulic fluids	100-400 Hz	Floating Center	Electrical, Manual	Solenoid operated, Manually operated	All parts steel. All operating parts hardened steel	ISO 4406 18/16/13, SAE Class 4	3000 psi	-34 to +121 °C	50 ms	3000 psi	Proportional Directional Control	8.5 Gal/min	10 @ 3000 PSI (210 BAR) cm3/min	Nitrile	8.5 Gal/min	Push and Pull	2.33 @ 12 VDC, 1.17 @ 24 VDC A	Less than 6%	+/- 15% @ 75% Nominal Current and Constant DeltaP Maintained with Pressure Compensator	25% - 30% of Input Signal	Floating Center	Nitrile	3000 PSI, 210 BAR	8.5 GAL/MIN, 32 L/MIN	Push and Pull
DSP105C4V	Backordered	Contact Us	3000 psi	n/a	-15 °F	45-2000 SSU (6 to 420 cSt)	Hydraulic Systems Division	+204 °C	0.28 kg	3 lb-ft	5/8" Super Coil High Watt (CAP)	28 W	34 Nm	C10-4	Mineral-based or synthetic hydraulic fluids	100-400 Hz	Floating Center	Electrical	Solenoid Operated	All parts steel. All operating parts hardened steel	ISO 4406 18/16/13, SAE Class 4	210 bar	-15 to +400 °F	50 ms	210 bar	Proportional Directional Control	8.5 Gal/min	10 @ 3000 PSI (210 BAR) cm3/min	Fluorocarbon	8.5 Gal/min	n/a	2.33 @ 12 VDC, 1.17 @ 24 VDC A	Less than 6%	+/- 15% @ 75% Nominal Current and Constant DeltaP Maintained with Pressure Compensator	25% - 30% of Input Signal	Floating Center	Fluorocarbon	3000 PSI, 210 BAR	8.5 GAL/MIN, 32 L/MIN	N/A
GP02511V	Backordered	Contact Us	5000 psi	n/a	-26 °C	45-2000 SSU (6 to 420 cSt)	Hydraulic Systems Division	+204 °C	0.15 kg	3 lb-ft	1/2" Super Coil	14, 19 W	30 Nm	C08-4	Mineral-based or synthetic hydraulic fluids	100-400 Hz	Normally Closed	Electrical, Manual	Solenoid operated, Manually operated	All parts steel. All operating parts hardened steel	ISO 4406 18/16/13, SAE Class 4	350 bar	-26 to +204 °C	50 ms	3000 psi	Proportional Directional Control	4, 4.5 Gal/min	10 @ 3000 PSI (210 BAR) cm3/min	Fluorocarbon	4, 4.5 Gal/min	Non-Detented	1.15 @ 12 VDC, 1.58 @ 12 VDC, 0.58 @ 24 VDC, 0.79 @ 24 VDC A	Less than 6%	+/- 15% @ 75% Nominal Current and Constant DeltaP Maintained with Pressure Compensator	25% - 30% of Input Signal	Normally Closed	Fluorocarbon	5000 PSI, 350 BAR	4, 4.5 GAL/MIN, 15, 17 L/MIN	Non-Detented
GP02512V	Backordered	Contact Us	5000 psi	n/a	-26 °C	45-2000 SSU (6 to 420 cSt)	Hydraulic Systems Division	+204 °C	0.15 kg	4.1 Nm	1/2" Super Coil	14, 19 W	22 lb-ft	C08-4	Mineral-based or synthetic hydraulic fluids	100-400 Hz	Normally Closed	Electrical, Manual	Solenoid operated, Manually operated	All parts steel. All operating parts hardened steel	ISO 4406 18/16/13, SAE Class 4	350 bar	-26 to +204 °C	50 ms	210 bar	Proportional Directional Control	4, 4.5 Gal/min	10 @ 3000 PSI (210 BAR) cm3/min	Fluorocarbon	4, 4.5 Gal/min	Detented	1.15 @ 12 VDC, 1.58 @ 12 VDC, 0.58 @ 24 VDC, 0.79 @ 24 VDC A	Less than 6%	+/- 15% @ 75% Nominal Current and Constant DeltaP Maintained with Pressure Compensator	25% - 30% of Input Signal	Normally Closed	Fluorocarbon	5000 PSI, 350 BAR	4, 4.5 GAL/MIN, 15, 17 L/MIN	Detented
GP02522N	Backordered	Contact Us	350 bar	n/a	-34 °C	45-2000 SSU (6 to 420 cSt)	Hydraulic Systems Division	+121 °C	0.34 lb	3 lb-ft	1/2" Super Coil	14, 19 W	30 Nm	C08-4	Mineral-based or synthetic hydraulic fluids	100-400 Hz	Normally Closed	Electrical, Manual	Solenoid operated, Manually operated	All parts steel. All operating parts hardened steel	ISO 4406 18/16/13, SAE Class 4	350 bar	-30 to +250 °F	50 ms	3000 psi	Proportional Directional Control	17, 21 L/min	10 @ 3000 PSI (210 BAR) cm3/min	Nitrile	4.5, 5.5 Gal/min	Detented	1.15 @ 12 VDC, 1.58 @ 12 VDC, 0.58 @ 24 VDC, 0.79 @ 24 VDC A	Less than 6%	+/- 15% @ 75% Nominal Current and Constant DeltaP Maintained with Pressure Compensator	25% - 30% of Input Signal	Normally Closed	Nitrile	5000 PSI, 350 BAR	4.5, 5.5 GAL/MIN, 17, 21 L/MIN	Detented
GP02531V	Backordered	Contact Us	350 bar	n/a	-26 °C	45-2000 SSU (6 to 420 cSt)	Hydraulic Systems Division	+400 °F	0.15 kg	3 lb-ft	1/2" Super Coil	14, 19 W	30 Nm	C08-4	Mineral-based or synthetic hydraulic fluids	100-400 Hz	Floating Center	Electrical, Manual	Solenoid operated, Manually operated	All parts steel. All operating parts hardened steel	ISO 4406 18/16/13, SAE Class 4	5000 psi	-26 to +204 °C	50 ms	3000 psi	Proportional Directional Control	2.7, 4 Gal/min	10 @ 3000 PSI (210 BAR) cm3/min	Fluorocarbon	10, 15 L/min	Non-Detented	1.15 @ 12 VDC, 1.58 @ 12 VDC, 0.58 @ 24 VDC, 0.79 @ 24 VDC A	Less than 6%	+/- 15% @ 75% Nominal Current and Constant DeltaP Maintained with Pressure Compensator	25% - 30% of Input Signal	Floating Center	Fluorocarbon	5000 PSI, 350 BAR	2.7, 4 GAL/MIN, 10, 15 L/MIN	Non-Detented