- Availability & Price
- Search SKU
Filter by attributes
- Body Material
- Connection 1 Tube Outside Diameter
- Connection 1 Type
- Connection 2 Thread Size
- Connection 2 Tube Outside Diameter
- Connection 2 Type
- Connection 3 Thread Size
- Connection 3 Tube Outside Diameter
- Connection 3 Type
- Connection 4 Tube Outside Diameter
Seal-Lok O-Ring Face Seal Tube Fittings and Adapters
*PRODUCT IMAGE IS REPRESENTATIVE PROVIDED BY THE MANUFACTURER. DO NOT MAKE BUYING DECISIONS SOLEY BASED ON THE IMAGE. PLEASE VERIFY SPECIFICATIONS MEET YOUR REQUIREMENTS.
Parker's O-ring Face Seal (ORFS) Tube Fittings and Adapters, Seal-Lok, meet or exceed the requirements of both SAE J1453 and ISO 8434-3 and have international acceptance. O-ring face seal fittings offer zero clearance, resistance to over torque and vibration resistance making it an ideal reusable hydraulic fitting solution across many markets. Seal-Lok tube fittings and adapters come in steel and stainless steel. Parker's Trap-Seal for ORFS improves customer experience by eliminating potential hydraulic leaks caused by O-ring fall-out and O-ring pinch during assembly. This provides customers a competitive advantage while leading to reduced overall cost.
Markets:
• Construction
• Military Ground Systems
• Aerial Lift
• Agriculture
• Material Handling
• Military Marine
• Machine Tool
• Transportation
• Alternative Energy
• Off-Shore/Oil & Gas
Features/Benefits:
• Highly resistant to over-torque, withstanding 200% torque above the rated value without any damage to the fitting, creating unlimited reusability.
• Flat sealing surface allows for zero clearance installation.
• Suitable for a wide range of wall thicknesses and are adaptable to inch tube, metric tube and hose.
• Patented Trap-Seal design provides optimal seal retention in ORFS CORG groove and prevents seal pinch during assembly.
• Patent-pending FastSeal connection technology is new way to make fast, leak-free ORFS tube connections without the need for brazing or flanging equipment. Only a wrench and tube is needed. FastSeal is available under the Seal-Lok Nut selection option. See the Product Support tab for more information on FastSeal.
• Steel fittings come standard with ToughShield Plus plating which substantially exceeds the SAE corrosion hour requirements for red rust, lasting up to 3,000 hours without red rust as found by an independent test facility (tested to ASTM B117/ISO 9227). This enhanced performance provides customers with a competitive advantage through less downtime and extended equipment life, leading to increased revenues and reduced warranty costs.
• Parker's Robust Port Stud on adjustable ports is manufactured with a longer locknut virtually eliminating washer damage and potential leaks, as well as making assembly virtually mistake-proof. This feature improves customer internal efficiencies and reduces rework costs resulting from backup washer damage commonly seen with traditional SAE adjustable port ends in the market.
• Offered in steel and stainless steel in sizes 1/4" through 2” with working pressures up to 9200 psi.
Applications:
• Hydraulic fluid and gas handling connections
Read More...Markets:
• Construction
• Military Ground Systems
• Aerial Lift
• Agriculture
• Material Handling
• Military Marine
• Machine Tool
• Transportation
• Alternative Energy
• Off-Shore/Oil & Gas
Features/Benefits:
• Highly resistant to over-torque, withstanding 200% torque above the rated value without any damage to the fitting, creating unlimited reusability.
• Flat sealing surface allows for zero clearance installation.
• Suitable for a wide range of wall thicknesses and are adaptable to inch tube, metric tube and hose.
• Patented Trap-Seal design provides optimal seal retention in ORFS CORG groove and prevents seal pinch during assembly.
• Patent-pending FastSeal connection technology is new way to make fast, leak-free ORFS tube connections without the need for brazing or flanging equipment. Only a wrench and tube is needed. FastSeal is available under the Seal-Lok Nut selection option. See the Product Support tab for more information on FastSeal.
• Steel fittings come standard with ToughShield Plus plating which substantially exceeds the SAE corrosion hour requirements for red rust, lasting up to 3,000 hours without red rust as found by an independent test facility (tested to ASTM B117/ISO 9227). This enhanced performance provides customers with a competitive advantage through less downtime and extended equipment life, leading to increased revenues and reduced warranty costs.
• Parker's Robust Port Stud on adjustable ports is manufactured with a longer locknut virtually eliminating washer damage and potential leaks, as well as making assembly virtually mistake-proof. This feature improves customer internal efficiencies and reduces rework costs resulting from backup washer damage commonly seen with traditional SAE adjustable port ends in the market.
• Offered in steel and stainless steel in sizes 1/4" through 2” with working pressures up to 9200 psi.
Applications:
• Hydraulic fluid and gas handling connections
| Action | SKU | Availability | Partner Available | Price | Division | Maximum Dynamic Pressure | Body Material | O-Ring Material | Specifications Met | Connection Type | Connection 1 Type | Connection 2 Type | Connection 4 Type | Connection 2 Thread Size | Connection 3 Thread Size | Connection 4 Tube Outside Diameter | Shape | Connection 3 Type | Connection 3 Tube Outside Diameter | Connection 1 Tube Outside Diameter | Connection 2 Tube Outside Diameter | Dimensional Weight |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 12R6MLOS | Backordered | Backordered | $55.56 | Tube Fittings Division | 6000 psi | Steel | 90 Durometer Nitrile | SAE J1453 | O-ring Face Seal | Male O-Ring Face Seal | Female O-Ring Face Seal Swivel | na | na | na | na | Tee | Male O-Ring Face Seal | 18, 20 mm | 18, 20 mm | 18, 20 mm | 0.1450359712230216 lb | |
| 12S6MLOS | Backordered | Backordered | $43.41 | Tube Fittings Division | 6000 psi | Steel | 90 Durometer Nitrile | SAE J1453 | O-ring Face Seal | Male O-Ring Face Seal | Male O-Ring Face Seal | na | na | na | na | Tee | Female O-Ring Face Seal Swivel | 18, 20 mm | 18, 20 mm | 18, 20 mm | 0.22473021582733813 lb | |
| 12TT4LS | Backordered | Tube Fittings Division | 6000 psi | Steel | na | SAE J1453 | Test point connector | Female O-Ring Face Seal Swivel | Female BSPP | na | 1/4-19 | na | na | Straight | na | na | na mm | na inch | ||||
| 12V5OMLOS | Backordered | Tube Fittings Division | ||||||||||||||||||||
| 12V6MLOS | Backordered | Tube Fittings Division | 6000 psi | Steel | 90 Durometer Nitrile | SAE J1453 | O-ring Face Seal | Male O-Ring Face Seal | Female O-Ring Face Seal Swivel | na | na | na | na | 45° Elbow | na | na | 18, 20 mm | na mm | ||||
| 12WEMLOS | Backordered | Backordered | $67.98 | Tube Fittings Division | 6000 psi | Steel | 90 Durometer Nitrile | SAE J1453 | Bulkhead Tube to Tube with Metric Hex | Male O-Ring Face Seal | Male O-Ring Face Seal Bulkhead | na | na | na | na | 90° Elbow | na | na | 18, 20 mm | 18, 20 mm | 0.39568345323741005 lb | |
| 12WLNMLS | Backordered | 1 in stock | $12.56 | Tube Fittings Division | na | Steel | na | SAE J1453 | O-ring Face Seal | Female O-Ring Face Seal | na | na | na | na | na | Bulkhead Locknut with Metric Hex | na | na | 18, 20 mm | na | 0.0181294964028777 lb | |
| 12WMLOS | Backordered | Backordered | $35.70 | Tube Fittings Division | 6000 psi | Steel | 90 Durometer Nitrile | SAE J1453 | O-ring Face Seal | Male O-Ring Face Seal | Male O-Ring Face Seal Bulkhead | na | na | na | na | Straight | na | na | 3/4 inch | 18, 20 mm | 0.03597122302158273 lb | |
| 12WMLOWLNMLSS | Backordered | Tube Fittings Division | 6000 psi | Stainless Steel | 90 Durometer Nitrile | SAE J1453 | O-ring Face Seal | Male O-Ring Face Seal | Male O-Ring Face Seal Bulkhead with Locknut | na | na | na | na | 90° Elbow | na | na | 3/4 inch | 18, 20 mm | ||||
| 16 AOEL6-S | Backordered | 15 in stock | $61.11 | Tube Fittings Division | 5500 psi | Steel | 90 Durometer Nitrile | SAE J1453 | O-ring Face Seal | Female O-Ring Face Seal Swivel | Male SAE-ORB | na | 1 5/16-12 inch | na | na | 90° Elbow | na | na | 22, 25 mm | na | 0.31160071942446044 lb | |
| 16 BL-S | 68 in stock | 849 in stock | $9.40 | Tube Fittings Division | na | Steel | na | SAE J1453 | O-ring Face Seal | Female O-Ring Face Seal | na | na | na | na | na | Nut | na | na | 22, 25 mm | na | 0.06168277877697842 lb | |
| 16 BL-SS | 28 in stock | 109 in stock | $120.15 | Tube Fittings Division | na | Stainless Steel | na | SAE J1453 | O-ring Face Seal | Female O-Ring Face Seal | na | na | na | na | na | Nut | na | na | 22, 25 mm | na | 0.062320143884892085 lb | |
| 16 C5OLO-S | 42 in stock | 565 in stock | $46.02 | Tube Fittings Division | 5500 psi | Steel | 90 Durometer Nitrile | SAE J1453 | O-ring Face Seal | Male O-Ring Face Seal | Male SAE-ORB | na | 1 5/16-12 inch | na | na | 90° Elbow | na | na | 1 inch | na | 0.24673111510791368 lb | |
| 16 C5OLO-SS | 1 in stock | 4 in stock | $420.21 | Tube Fittings Division | 5500 psi | Stainless Steel | 90 Durometer Nitrile | SAE J1453 | O-ring Face Seal | Male O-Ring Face Seal | Male SAE-ORB | na | 1 5/16-12 inch | na | na | 90° Elbow | na | na | 1 inch | na | 0.24172661870503598 lb | |
| 16 C6LO-S | 21 in stock | 456 in stock | $48.47 | Tube Fittings Division | 6000 psi | Steel | 90 Durometer Nitrile | SAE J1453 | O-ring Face Seal | Male O-Ring Face Seal | Female O-Ring Face Seal Swivel | na | na | na | na | 90° Elbow | na | na | 1 inch | 22, 25 mm | 0.24673111510791368 lb | |
| 16 C6LO-SS | Backordered | 2 in stock | $499.34 | Tube Fittings Division | 6000 psi | Stainless Steel | 90 Durometer Nitrile | SAE J1453 | Tube to Tube | Male O-Ring Face Seal | Female O-Ring Face Seal Swivel | na | na | na | na | 90° Elbow | na | na | 22, 25 mm | 22, 25 mm | 0.22473021582733813 lb | |
| 16 CC5OLO-S | 1 in stock | 54 in stock | $140.62 | Tube Fittings Division | 5500 psi | Steel | 90 Durometer Nitrile | SAE J1453 | O-ring Face Seal | Male O-Ring Face Seal | Male SAE-ORB - Long | na | 1 5/16-12 inch | na | na | 90° Elbow | na | na | 28, 30, 32 mm | na | 0.4419064748201439 lb | |
| 16 CLO-S | 18 in stock | 141 in stock | $62.00 | Tube Fittings Division | 3000 psi | Steel | 90 Durometer Nitrile | SAE J1453 | Tube to NPT | Male O-Ring Face Seal | Male NPT/NPTF | na | na | na | na | 90° Elbow | na | na | 22, 25 mm | na | 0.1762365107913669 lb | |
| 16 CLO-SS | Backordered | 11 in stock | $353.92 | Tube Fittings Division | 3000 psi | Stainless Steel | 90 Durometer Nitrile | SAE J1453 | O-ring Face Seal | Male O-Ring Face Seal | Male NPT/NPTF | na | na | na | na | 90° Elbow | na | na | 1 inch | na | 0.22473021582733813 lb | |
| 16 ELO-S | Backordered | 174 in stock | $40.78 | Tube Fittings Division | 6000 psi | Steel | 90 Durometer Nitrile | SAE J1453 | Tube to Tube | Male O-Ring Face Seal | Male O-Ring Face Seal | na | na | na | na | 90° Elbow | na | na | 22, 25 mm | 22, 25 mm | 0.1762365107913669 lb |
© COPYRIGHT Connector Specialists 2025 | TERMS & CONDITIONS